GPS Jumbo Transparent Filter Housings are made of SAN material with
innovative features like lower pressure drop at higher flow rate ,
larger connections, air venting provision , robust knife - edge ,
molded structure , zero bypass and leak proof sealing. They are
sealed with top seated Buna - N / Silicon / Viton * O ring by
positive tangential contact that eliminates accidental misplacement
The larger body size allows for greater cartridge capacity , thus
reducing the number of vessels normally required in parallel
installation . The internal port has been enlarged from standard
size to allow liquid to pass through with minimum restriction .
Housings are stress relieved for added clarity and strength .
Transparent housings offer on - site examination of flow ,
cartridge performance and life.
Caps are manufactured of reinforced polypropylene and are available
with 1 and 1.5 BSP ( F ) connections to match various flow rating
and piping configurations . Caps are available with a pressure
release mechanism to release the housing pressure when changing a
Pressure relief mechanism is constructed of stainless steel spring
and screw and black polypropylene button .
All caps come with four mounting brackets for easy installation .
All housings have been tested and passed the hydrostatic leak and
burst pressure to ensure consistence safe performance .
* Viton is a registered trademark of Dupont.
Features & Benefits
- Highly durable SAN material
- Lower Pressure Drop @ Higher Flow Rate
- Specially designed for higher flow rates.
- Ideal substitute for costly low pressure SS housings.
- An extra large cartridge results in higher dirt holding capacity.
- Molded Construction for Product Consistency
- Robust knife-edge design ensures consistent cartridge sealing
- Thicker Walls for Increased Strength
- Leak Proof Sealing
- Larger Connection for Maximum Output
- Air Release Mechanism
- Mounting Holes Provision
Materials of construction
Sump : SAN (Styrene Acrylo-nitrile)
Head : Reinforced Polypropylene
Vent : Polypropylene with SS Spring and Screw
Seal : Silicon
Inlet/Outlet connection : 1 , 1.5
Connection type : Threaded BSP (F)
Cartridge type : DOE
Vent : Provided
Max . Operating Pressure : 7 kg/cm2
Max . Operating Temperature : 700C
Cartridge dimensions accepted
i) 110 mm OD X 10/254 mm
ii) 110 mm OD X 20/508 mm